Parts & Accessories

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

Engineered in collaboration with Hydrapak, the Replacement Blaster Bite Valve is designed for use with the Hydrapak Reservoir, while compatible with most hydration-pack reservoirs. The twist-on-and-off valve is intuitive for ease of use while riding. - Limited Lifetime Warranty - Hydrapak Blaster bite valve - Highest water flow on the market - Twist on/off valve - Easy disassembly for cleaning

The Blaster is a quality high flow 45 degree angle mouthpiece. With its self-sealing silicone sheath it provides a good flow of water and self seals itself after each sip. The valve also has a twist shut-off function to limit the flow of water while not riding or to avoid spills in the car.

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!

A dynamic, integrated hydration solution created for hardcore runners, hikers and cyclist, the Fusion 3L Reservoir with Tru Zip Waterproof Zipper is ready for the long haul. Enjoy convenient compatibility thanks to a universal hanger that will fit any hydration-compatible packs. Our Quicklink System ensures easy on-the-go reservoir removal from the pack. Keep it clean with Hydroguard technology to limit bacteria in the reservoir and tube. Even better, the rigid backplate eliminates need for baffle for easier cleaning and drying. Repurpose Green Sustainability Badge: Made with safer chemicals.

Trek into unknown adventure with the confidence of clean drinking water. The Crux 2L Reservoir Filtration Kit filtered by LifeStraw carries 2 liters of water that pass through two separate stages of filtration for safe hydration. The Hollow Fiber Filter removes bacteria, parasites, and microplastics and the Activated Carbon Filter reduces taste, odor, and chlorine. The wide-mouth fill port includes a tethered leak-proof cap and ergonomic handle for a sturdy fill. An on/off lever prevents unwanted drips and the Big Bite Valve self-seals after each sip. Hydroguard anti-microbial technology inhibits the growth of bacteria in the reservoir and tube, and all components are free of BPA, BPS, and BPF. Pack assembly is a breeze with an easy-to-load low-profile reservoir baffle and Quicklink System that features an auto shut-off to prevent leakage. Convert into a gravity bag by pairing with CamelBak's Reservoir Gravity Kit (sold separately). Safe hydration, trustworthy filtration.

Our new Fusion 6L Group Hydration Reservoir is perfect for adventures with friends and family. Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. It's enhanced by Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Pair with our ChillBak Pack 30 Cooler for portable party people to keep beverages cool. Dig dynamic design compatibility with our CamelBak reservoir filter kit and easy collapsibility for simple storage when the party's home for the week.  Made with safer chemicals, earning the Repurpose Green Sustainability Badge. 

B-RAD Everywhere Base 2

Hydration for running, hiking and biking, wherever you may roam. We create ever-evolving hydration systems that keep up with our always-exploring adventurers. The Fusion 2L Reservoir with Tru Zip Waterproof Zipper offers revolutionary design that's easy to use.  We bring heavyweight features in an ultralight package equipped with a universal hanger for all hydration-compatible packs. Molded backplate creates a thin profile with no need for baffles so cleaning is that much easier. Made with safer chemicals, earning the Repurpose Green Sustainability Badge. At journey's end, everyone will enjoy easier cleaning thanks to Hydroguard technology which inhibits the growth of bacteria in the reservoir and tube.

- Customize your race belt with our removable micro race locks with quick release clasp - Fully adjustable race bib toggles - Hi-viz reflective accents - Compatible with all Ergo & Ultralight Belts

Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - Blaster high-flow bite valve w/ shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside pack - Molded 3D bottom for much better drying between rides

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

B-RAD Everywhere Base 3

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 2L / 70 oz Dakine x Hydrapak 3D lumbar reservoir - Blaster high-flow bite valve w/shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside the pack - Molded 3D bottom for much better drying between rides

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.

On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061

The Replacement Activated Carbon Filter is compatible with the Crux 2L Reservoir Filtration Kit filtered by LifeStraw or the Reservoir Filter Kit accessory. Chlorine is reduced and bad odor and taste are removed when paired with an existing Hollow Fiber Filter and used as part of the two stage LifeStraw filtration system.

The Dakine 2L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

This Shape-Shift hydration system adds a versatile baffle. The baffle can be zipped to slim the bladder profile and unzipped to increase fluid volume or reverse to clean and dry. The patented super-wide slide top opening makes it easy to load up with ice on hot days and turn inside out to clean when your adventure is complete. The hydration bladder is made out of TPU (thermoplastic polyurethane) and comes complete with a 45 degree Blaster bite valve, easy quick connector with Plug-n-Play and flexible non-kinking Hydraflex drink tube. The hydration system is reversible for easy cleaning and drying. The hydration bladder has a patented wide slider opening for quick filling and leak proof seal and also has RF welded seams to create superior bonds at a molecular level. The hydration bladder is BPA and PVC free and is made out of FDA and EU approved materials. The hydration bladder is also dishwasher safe and is naturally Anti-fungal. This product is made by Hydrapak LLC for USWE Sports AB.