Tools

$939.95
The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades.
Kit Includes:
- ATD-1.2 Adjustable Torque Driver
- AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm
- AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm
- BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II
- BBT-22 Bottom Bracket Tool
- BBT-69.2 Bottom Bracket Tool
- BO-2 Bottle Opener
- CBW-1 Open End Wrench: 8/10mm
- CBW-4 Open End Wrench: 9/11mm
- CC-4 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CNW-2 Chainring Nut Wrench
- CP-1.2 Cassette Pliers
- CT-3.3 Chain Tool
- CWP-7 Compact Universal Crank Puller
- DAG-2.2 Derailleur Hanger Alignment Gauge
- DH-1 Dummy Hub
- DP-2 Threaded Dummy Pedal
- DSD-2 Derailleur Screwdriver: Cross Tip
- DSD-4 Derailleur Screwdriver: Flat Blade
- DT-2 Rotor Truing Fork
- FR-5.2H Cassette Lockring Tool with Handle
- GSC-1 GearClean Brush
- HMR-8 8 oz. Shop Hammer
- HXS-1.2 Hex Wrench Set
- MLP-1.2 Master Link Pliers
- NP-6 Needle Nose Pliers
- PAW-6 6" Adjustable Wrench
- PH-1.2 P-Handle Hex Wrench Set
- PW-4 Professional Pedal Wrench
- RR-12 Tape Measure
- SBC-1 Spoke, Bearing and Cotter Gauge
- SBS-1.2 Socket and Bit Set
- SCW-13 13mm Shop Cone Wrench
- SCW-14 14mm Shop Cone Wrench
- SCW-15 15mm Shop Cone Wrench
- SCW-16 16mm Shop Cone Wrench
- SCW-17 17mm Shop Cone Wrench
- SCW-18 18mm Shop Cone Wrench
- SCW-19 19mm Shop Cone Wrench
- SP-7 Side Cutter Pliers
- SW-0 Precision Spoke Wrench: .127"
- SW-2 Precision Spoke Wrench: .136"
- SWR-8 3/8" Drive Ratchet Handle
- SZR-1 Shop Scissors
- TL-1.2 Tire Lever Set
- TL-4.2 Tire Lever Set
- TL-6.2 Steel Core Tire Levers
- TWS-1 Torx Compatible Wrench Set
- UP-SET Utility Pick Set
- VC-1 Valve Core Tool
- ZP-5 5" Flush Cut Pliers

$479.95
Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+.
- Both uprights move simultaneously to always keep wheel centered in the stand
- Accommodates tire widths up to 5-inches+ with or without brake rotor mounted
- Speed knob to quickly change axle widths
- Accommodates hub widths from 75mm to over 250mm
- Precise operation and adjustability
- Built in thru-axle adaptors
- Machined, welded, assembled and calibrated in our factory in St. Paul, MN
- Chrome plated and powder coated heavy gauge steel construction
- Removable, replaceable nylon caliper tips to protect painted/anodized rims

$469.00
The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached
- 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm)
- Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes
- Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1)
- Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2)
- Precise to +/- 4%

$429.95
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups.
- 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs
- 8 installation drifts for standalone bearing installation
- Organized in a convenient storage case
- Full list of compatible bearing inner/outer diameters found on instructions/parts diagram
NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).

$408.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style.
ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain.
With ShockWiz, you know exactly how your suspension is performing – and how to make it better.
The Direct Mount version is for inverted forks such as the RockShox RS-1.
Features & Benefits:
- Automated tuning recommendations.
- Shock tuning score - a snapshot of how well your suspension is set up for you.
- Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill.
- Inexpensive, replaceable CR2032 battery lasts for months.
- Waterproof and dustproof - IP67 rating.
- Two alternative hoses (included) offer a range of fitting options.
- Smartphone app is compatible with Apple and Android phones.
Essential Details:
- ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use.
- You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive.
- Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app.
- In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.

$407.94
The Park Tool 758.2 will ream and face the head tubes of bike using the 1.5" standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750.2 Centering Cone Adaptor.

$389.95
The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets.
- Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm
- Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed
- Organized in a convenient storage case

$361.22
High-quality combination ratchet wrench set by Wera.
The new generation of combination ratchet wrenches, suitable for hexagon bolt heads or nuts. Comes with a holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts.
- Practical holding function thanks to the metal plate in the jaw
- Limit stop prevents any slipping
- The double-hex geometry reduces the risk of slipping
- Return angle of only 30 degrees
- "Take-it-easy" tool finder: color coding by size

$354.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style.
ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain.
With ShockWiz, you know exactly how your suspension is performing – and how to make it better.
Features & Benefits:
- Automated tuning recommendations
- Shock tuning score - a snapshot of how well your suspension is set up for you
- Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill.
- Inexpensive, replaceable CR2032 battery lasts for months
- Waterproof and dustproof - IP67 rating
- Two alternative hoses (included) offer a range of fitting options
- Smartphone app is compatible with Apple and Android phones
Essential Details:
- ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use.
- You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive.
- Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app.
- In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

$350.00
The Team Edition Portable Tool Kit is the ultimate field and home service partner for the most discerning bike mechanics. Developed with input from Tour de France, Enduro World Cup and World Cup Downhill mechanics, the ultralight and compact footprint offers 25 of the most common bike repair and maintenance features – from 19 bicycle-specific tools. Housed in a TPU-coated case, this beautiful tool collection is protected from water, grease and abrasion. Its compact design means you’ll always bring it with you, wherever you’re riding today.
- 25 functions from 19 professional grade bicycle-specific tools
- Ergonomic, overmolded file tread grips for precision, comfort and style
- External attachment and internal support structure for mounting on Feedback Sports work stands
- TPU-coated travel case is abrasion-resistant, water-resistant, resistant to greases and oils – built to last
- Organizational elastic banding keeps everything in it’s place and offers space for additional tools
- Allen Wrenches – 2 / 2.5 / 3 / 4 / 5 / 6mm
-8 &10mm L-handle Allen Wrenches
- Magnetic-Tipped Screwdrivers – Flathead 6mm; Phillips #2 and #0
- Shimano Crank Cap Tool
- 15mm Pedal Wrench
- 15mm Bolt-on Axle Nut Tool
- Steel Core Tire Levers (2)
- Spoke Multi-Wrench
- Valve Extender Wrench
- Valve Core Tools – Schrader and Presta
- Rotor Truing Tools
- Precision Chain Pin Press
- Cassette and Disc Brake Rotor Lockring Wrench
- Cassette Pliers
- Cable Cutter and Cable Crimper
- And several more…
- At 9.8lbs (4.5kg), hitting the road with this tool kit is never in question
- Limited Lifetime Warranty

$339.95
We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment.
Kit Includes:
- AWS-1 3-Way Hex Wrench
- BBB-4 Big Blue Book of Bicycle Repair
- CC-4 Chain Checker
- CM-5.3 Cyclone Chain Scrubber
- CN-10 Professional Cable and Housing Cutter
- CNW-2 Chainring Nut Wrench
- CT-3.3 Chain Tool
- DCW-1 Double-Ended Cone Wrench: 13/14mm
- DCW-2 Double-Ended Cone Wrench: 15/16mm
- DCW-3 Double-Ended Cone Wrench: 17/18mm
- DH-1 Dummy Hub
- DT-2 Rotor Truing Fork
- FR-5.2 Cassette Lockring Tool
- GSC-1 GearClean Brush
- HCW-16.3 Chain Whip/Pedal Wrench
- HXS-1.2 Professional L-Shaped Hex Wrench Set
- MLP-1.2 Master Link Pliers
- PAW-12 12" Adjustable Wrench
- RR-12 Tape Measure
- SD-2 #2 Phillips Screwdriver
- SD-3 3mm Flat Blade Screwdriver
- SW-0 Precision Spoke Wrench: .127"
- SW-2 Precision Spoke Wrench: .136"
- TL-1.2 Tire Lever Set
- TWS-3 Torx Compatible 3-Way Wrench
- VC-1 Valve Core Tool

$338.74
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

$305.88
Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread.
Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

$299.00
- Press set for common frame and through axle hub bearing sizes
- See wheelsmfg.com for full list of contents

$290.00
Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism.
- With 3/8" square drive, reversible ratchet, 45 teeth
- Audible and tactile release mechanism when the set torque value is reached
- Measuring range: 10-50 Nm; Precise to +/- 3%
- Very robust design with ergonomic 2-component handle suitable for right-hand use

$289.95
The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely.
- Magnetic back plate for easy configuration and assembly
- Organized in a convenient storage case
Includes extractor cups/drifts for the following ODs:
- 16mm
- 17mm
- 19mm
- 20.6mm
- 21mm
- 22mm
- 22.3mm
- 24mm
- 26mm
- 28mm
- 28.6mm
- 30mm
- 32mm
- 35mm
Includes extractor studs and pilots for bearings with the following IDs:
- 8.5–9mm
- 10mm
- 12mm
- 12.7mm
- 15mm
- 17mm
- 20mm
NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

$280.99
Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism.
- With 1/4" square drive, reversible ratchet, 45 teeth
- Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values
- Audible and tactile release mechanism when the set torque value is reached
- Measuring range: 2.5-25 Nm; Precise to +/- 4%
- Designed with ergonomic 2-component handle suitable for right-hand use

$262.95
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

$188.21 - $239.25
Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility.
- Freely pivoting ratchet head with 5 predefined locking positions
- Fine toothing with 72 teeth
- Small return angle of only 5 degrees
- Free-turning sleeve for high working speeds
- Take-it-easy tool finder: color coding by size

$214.99
19-Piece Shop Quality Cone Wrench Set
Pedro's cone wrenches are made from 2mm thick, precision laser-cut, heat-treated tool steel and are revered for outlasting many other "shop quality" cone wrenches. Pedro's designed each cone wrench to fit perfectly, protecting the hub and ensuring simple and safe usage for the mechanic. Each flat wrench also features a single-ended design with an ergonomic cushioned grip to provide maximum leverage & comfort. The updated shape features a smaller head profile for better clearance and a longer handle for improved leverage and control.
- Updated shape features a smaller head profile for clearance and a longer handle for control.
- Superior material and heat treatment outlast the competition.
- Precision laser-cut design with ergonomic cushioned grip.
- Set includes two each of 13, 14, 15, 16, 17 and one each of 18, 19, 20, 21, 22, 23, 24, 26 and 28mm sizes.
- Backed by Pedro's lifetime warranty.

$211.00
Complete tool kit for installing wheels manufacturing bottom brackets.
Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings:
- 22mm
- 24mm
- 29mm
- 30mm
Bottom bracket press pro install kit includes:
- UNC 48mm 16-notch socket x 1
- 22x37 drift 1/2" x 1
- 6806 OB 1/2" x 2
- 24x37 OB 1/2" x2
- 1/2" frame drift x 1 1/2-13 x 9. 7"
- threaded rod unc x 1 44-48. 5mm
- double 16-notch 1/2" socket x 1
- threaded handle x 2

$199.99
The Starter Tool Kit 1.1 is designed for the aspiring mechanic looking to get started with the right tools and room to grow. The kit starts with our Burrito Tool Wrap. This versatile wrap keeps your tools organized and protected in a durable, ultra-portable design with twenty pockets, waterproof exterior, and space for tools up to 13.75 inches (350mm) in length. Next we fill the Burrito with the essential tools needed by every mechanic. Finally, we round things out by leaving nine extra spots to add tools as you learn new skills and tackle new challenges.
Includes:
- 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes.
- 8mm L Hex
- Tire Lever Pair - Yellow
- Cassette Lockring Socket
- Phillips #2 Screwdriver
- Flat 5.5mm Screwdriver
- Pro Travel Pedal Wrench w/ 24mm Socket Driver
- Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm)
- Cable Cutter
- Pro Chain Whip with Integrated Fixed Gear Lockring Wrench
- Toothbrush

$199.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.

$199.95
- A torque wrench with adjustable range from 4-20Nm
- Reversible ratcheting head
- Bits are knurled to make insertion and removal easier
- Includes the following hex bits 3 4 5 6 8 10 and T20 T25 and T30 Torx bits
- Pro model also available which incl

$184.95
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools.
The SK-4 includes:
- AWS-10 Fold-Up Hex Wrench Set
- BBB-4 Big Blue Book of Bicycle Repair
- CC-3.2 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CT-5 Mini ChainBrute Chain Tool
- FR-5.2 Cassette Lockring Tool
- GSC-1 GearClean Brush
- HCW-16.3 Chain Whip/Pedal Wrench
- HR-8 8mm Hex Wrench
- MLP-1.2 Master Link Pliers
- SD-2 Shop Screwdriver: #2 Phillips
- SW-7.2 Triple Spoke Wrench
- TL-1.2 Tire Lever Set
- TWS-3 Torx Compatible 3-Way Wrench

$137.17 - $175.45
Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling with unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility.
- Convenient direction change thanks to switchover lever
- Extremely slim ratchet with long lever
- Return angle of only 5 degrees
- Take-it-easy tool finder: color coding by size

$170.00
- Essential bottom bracket bearing extractor set
- (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor

$169.99
Essential Tool Kit for the Home Mechanic
The Starter Bench Tool Kit is designed for the aspiring mechanic looking to get started with the right professional-quality tools and room to grow as new skills are learned.
- 11 professional-quality tools packed in a traditional toolbox.
- Tool selection focused on essential repair, adjustment, and replacement tasks.
- Perfect for the car, traveling to an event, or a home shop setup.
Tool List:
- Folding Hex/Screwdriver Set: 2.5, 3, 4, 5, 6, +, -
- 8mm Hex Tip
- T25 & T30 L Torx Wrenches
- Tire Lever Pair—Yellow
- Quick Link Pliers
- Six-Pack Chain Tool
- Pro Travel Pedal Wrench
- Pro Chain Whip
- Cassette Lockring Socket
- Cable Cutter

$168.42
Wera torque screwdriver.
Kraftform pistol handle for particularly high torque transfer, multi-component for high working speeds and ergonomic screwdriving. Variable torque setting option with highest precision. Featuring an easy-to-read scale value, you can make simple adjustment of the required torque value without any special tools. Multi-component Kraftform handle with hard and soft zones for high working speeds, while being easy on the hands.
- Unlimited torque to loosen seized screws
- Suitable for bits with 1/4" hexagon head drive
- Adjustable Kraftform torque screwdriver with pistol handle and Rapidaptor quick-release chuck
- Suitable for bits with 1/4" hex head drive
- Rapidaptor quick-release technology for rapid bit change
- Distinct signal when pre-set value is reached
- Numerical torque value indicator
Page 1 of 15
Next page