Filter By:
Cables

$22.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Compatibility
- HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate
- HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX
- HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy
- HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC
- HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Jagwire's Universal Pro Non-Crimps are a custom finishing touch for the ends of your brake and shift cables and prevent them from fraying so the cables keep functioning. Also, because they're not crimped in place and go on/off without tools, you can easily remove them for holding the ends of the cables to make adjustments. Best of all, the Non-Crimps are made of soft, safe rubber and they come in colors so you can add some more style to your ride.
- 4-pack

$49.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm

$14.99
The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.
TECH SPECS
- Housing: Coated linear strand
- Wire: 1.5mm pre-stretched slick wire
- Length: 50"
- Lug: Traditional cast
- Weight: 2.5oz

$12.99
- Replacement cable for the Jagwire Pro Dropper kit
- 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables
- An easy way to reduce the force required to activate a dropper post remote lever
- Perfect for dropper seatposts with "stealth" cable routing and tight housing bends
- Includes 2x heat-shrink shims
- For use with dropper seatposts ONLY
- Length: 2000mm

Jagwire's Universal Pro End Cap Packs contain a complete selection of aluminum housing ferrules and cable end caps (crimps) so that you can properly setup your cables and housing sections and prevent fraying cables. They come in 6 colors for customizing your ride, too.
- 4mm for use with solid color shift housing
- 4.5mm for use with braided shift housing
Each kit includes:
- Ten shift housing sealed end caps (ferrules)
- Six 5mm brake housing open end caps (ferrules)
- Four cable caps (crimps)

$11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- Double-ended SRAM/Shimano mountain and road compatible cable ends
- Stainless steel construction resists corrosion
- Double Ended: Yes
- Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain
- Defined Color: Silver
- Quantity Included: 1

$27.99
Jagwire 1x Pro Shift kits deliver enhanced performance and style to any bike with a single-chainring drivetrain. A Pro Polished Slick Stainless cable and the Slick-Lube housing liner provide an upgrade over OEM cable systems, with enhanced shifting precision and long-lasting performance.
The 1x Pro Shift kit is designed to work with nearly all frames and 1x shifting systems, including most internally-geared hubs. And with small parts included for both road and mountain systems, this kit is quick and easy to install. 1x Pro Shift kits are offered in 10 colors to match Jagwire's Pro Brake and Hydraulic Hose kits.
- The Pro Polished Slick cable combined with a Slick-Lube liner offer enhanced shifting precision and long-lasting performance
- All parts are included for a complete 1x shift cable and housing installation on either a road or a mountain bike
- The kit contains an extra-long inner cable and ample housing for large frames or a continuous housing run
- 1x kits are perfect for bikes with only a rear derailleur or an internally geared hub
- Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos
What's Included:
- 1x 2200mm LEX-SL Shift Housing
- 1x 2800mm Pro Polished Slick Shift Inner Cable
- 2x Sealed Alloy End Caps
- 4x Lined Alloy End Caps
- 1x Hooded Alloy End Cap
- 1x Cable Tip
- 1x 5G Tube Top
- 3x Cable Donuts
- 1x Rotating Hook

$49.99 - $52.99
With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit.
Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models.
- A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure
- Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately)
- Mountain Pro hydraulic hose kits are available in 12 colors and finishes
- Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos

$14.99
A truly one-size-fits-all solution, the Kink Lower Gyro Cable features three sets of brake cable end lugs that can be trimmed off after the correct cable length is chosen. The dual-cable system fits with all standard 990-style brakes and frames, and fits most popular gyros. The dual-cable stop plate bolts cleanly to existing frame cable stops, for perfect dual-cable routing.
TECH SPECS
- Size: Universal
- Housing: Coated Linear Strand
- Wire: 1.5mm Pre-Stretched Slick Wire
- Lug: Multi-Length Trimmable Lug System
- Weight: 3.4oz

$12.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Dual Cable
- Diameter: 1.5mm

$4.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- SRAM/Shimano
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- Color: Silver
- Quantity Included: 1
- Diameter: 1.5 mm

$14.99
The Kink Upper Gyro cables are a uniquely designed dual cable system and are available in two lengths to work with Kink-specific brake levers or the universal size to fit most other popular brake levers. The two ultra-smooth pre-stretched inner wires are combined into a single, cast lever lug, which brings the smoothness and stiffness of the dual-cable system to traditional brake levers without any protruding parts.
TECH SPECS
- Housing: Coated linear strand
- Wire: 1.5mm pre-stretched slick wire
- Lug: Unique, single, cast lever lug
- Weight: 2.3oz

$19.99
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

$16.99
Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance.
Tech Specs
- Housing: Coated linear strand
- Wire: 1.5mm Pre-stretched slick wire
- Length: 50"
- Lug: Two-piece bind-free brass
- Fits: Frames with 245mm cable stop distance
- Weight: 3.0oz

$22.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
- Allow the easy installation of Jagwire hose with Shimano disc brakes
- Kits contain enough hardware for both front and rear brakes
- Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation
Compatibility
- HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355
- HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

$8.99 - $32.99
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise.
- 10mm outside diameter
- Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

$33.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hope brakes and includes enough hardware for one bicycle.
Compatible with the following Hope brakes:
- Tech 3 X2
- E4
- V4
- Race Evo X2
- E4
- M4
- Tech Evo X2
- M4
- V2
- Race X2
- Tech X2
- M4
- V2
- Mini
- Mini Trials
- Mono Mini
- Mono M4
- 6TI
- Moto V2
- M6
- Hope Banjo

$10.99
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

$16.00
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration.
FEATURES
- Adjustable hanger slot allows upper cable to rotate for optimum alignment.
- The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex.
- Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh.
- All Odyssey Linear cables are offered with the K-Shield housing.
- Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included.
SPECS
- Housing length: 995mm
- Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended.
- Brake requirements: Open-ended U-brake arms.
- Works with most brake levers.
- Velcro strap included.
Page 1 of 1