Pedals

$99.00
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.
- Size: 110mm wide x 100mm long x 18mm high
- Spindle diameter: 9/16-inch
- Weight: 352 grams

$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.
- Size: 110mm wide x 100mm long x 9mm high
- Spindle diameter: 9/16-inch
- Weight: 308 grams

$20.00
• M4 threaded pedal cages mounting holes
• Four windows in pedal body large enough to fit double toe straps
• Polished Body
• Concave footbed
• Single-sided design

$19.99
The Safari pedal is designed with extra pins in these high impact areas to ensure the pedal stays grippy after withstanding severe abuse. The optimal pin placement, hexagonal pin shape, and knurling all combine to make this one of the most durable, effective plastic pedals in the market.
- Tough Nylon Fiberglass construction
- True dual concave design
- Knurled surface for extra grip
- 20 hexagonal pins per side

$16.99
The Dak pedals are the Dakota Roche signature model that feature 14 large hexagon molded pins on both sides for maximum grip.
- Slim profile
- Large surface area
- Heat treated 4130 spindle
- 9/16"

$65.00
Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.

$125.00
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.

$197.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever.
- Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike.
- The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing.
- Largest Q-Factor, largest body, longest and largest amount of pins!

$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: 10-15 (us) // 43-49 (eu)
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction pins: 9 per side (mounted from back)
- Inner Bearing type: Igus LL-glide bearing
- Outer Bearing type: Enduro cartridge bearing
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 355g per pair
- Warranty: 5 years

$99.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)

$119.99
Size specific magnesium platform pedal provides optimal shoe/pedal interface.
Details
- Magnesium pedal body for weight reduction
- Optimal surface area
- Minimal body profile - 16mm thin
- Concave pin profile & 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Serviceable, pedal refresh kit found here
Specs
- Adjustable pins: 10 per side
- Body material: AM60B Magnesium Alloy
- Endcap: T15
- Footprint: 114mm x 111mm
- Inner bearing type: Igus Bearing
- Max rider weight: No restriction
- Outer bearing type: Double Cartridge Bearing
- Shoe size: US 10-15 // EU 43-49
- Spindle material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 386g per pair

$125.00
Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles.
Details
- Hybrid pedal half flat / half clip-in
- 8 adjustable traction pins and textured finish for grip
- Wide 57mm q-factor for stability at speed
- Diamond plate pads for traction
- 2-sided entry / superior mud shedding
- Premium bearings & double seal system
Specs
- Adjustable pins: 8 per side
- Body material: A380 aluminum
- Cleats: Premium brass cleats with shims included
- Inner bearing type: Igus LL-glide bearing
- Max rider weight: No restriction
- Outer bearing type: Enduro cartridge bearing
- Q-factor: 57mm
- Release angle: 15° / 20°
- Spindle material: Forged scm 435 chromoly steel
- Spring material: 300 series stainless steel
- Warranty: 5 years
- Weight: 403g per pair
- Wing material: Cast stainless steel

$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.

$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel.
Specs:
Spindle material: Forged SCM 435 chromoly steel
Body material: Cast stainless steel
Wing material: 17-4PH stainless
Spring material: 300 series stainless steel
Release angle: 15° / 20°
Q-factor: 52mm
Inner bearing type: Igus LL-glide bearing
Outer bearing type: Enduro cartridge bearing
Cleat: Premium brass cleats with shims included
Weight: 280g per pair
Warranty: 5 years

$169.00
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair

$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)

$24.95
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability.
- Chromoly axle
- Dual DU bushing system
- Full-length 6mm off-road pins for added grip

$48.26
A modern take on the classic platform pedal style. DMR provides a large pedal body area and DU bushing system aimed to provide riders with control, durability and serviceability.
- 15 x 95 x 25mm (L x W x H)
- 8 replaceable M4x0.7x8 corner pins and 12 fitted non-replaceable pins per pedal
- Designed with grease ports; 'V-lube' grease syringe included with pedals
- Double concave pedal body for control and stability
- Classic parallelogram shape
- 9/16"

$74.95
These pedals re-work the classic parallelogram pedal design to offer increased grip, support and weight savings for anything from all-mountain, to dirt jump, to downhill.
- Large aluminum alloy platform profile for more surface area and improved grip
- Thin 16mm depth and concave body design
- Chromoly axle with sealed bearings
- Replaceable/tunable pins for preferred grip
- 9/16"

$54.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

$119.99
Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase.
- Extruded and CNC Machined 6061 T6 Aluminum
- 100mm x 100mm platform
- Concave body
- Fully Serviceable DU Bushing and Double Micro Sealed Bearing System
- Intended Use: Downhill, FR/DJ, Enduro, All Mountain
- Allen bolt style pins
- Additional Allen Pin kit included

$149.99
The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.

$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)

$16.00
Dimension City Pedals.
- Built-in reflectors, will not accept toe clips
- Molded nylon; 1-piece, caged-type pedal
- Slip-resistant surface

$16.00
Dimension Mountain Basic Pedals.
- Molded nylon 1-piece, caged-type pedal with reflectors
- Accepts toe clips
- Hang tag packaging
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 330g
Page 1 of 5
Next page